Docs Packages
  1. Packages
  2. Fortios
  3. API Docs
  4. router
  5. Policy
Fortios v0.0.5 published on Tuesday, Apr 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

fortios.router.Policy

Explore with Pulumi AI

fortios logo
Fortios v0.0.5 published on Tuesday, Apr 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

    Configure IPv4 routing policies.

    Example Usage

    import * as pulumi from "@pulumi/pulumi";
import * as fortios from "@pulumiverse/fortios";

const trname = new fortios.router.Policy("trname", {
    action: "permit",
    dstNegate: "disable",
    endPort: 25,
    endSourcePort: 65535,
    gateway: "0.0.0.0",
    inputDevices: [{
        name: "port1",
    }],
    outputDevice: "port2",
    protocol: 6,
    seqNum: 1,
    srcNegate: "disable",
    startPort: 25,
    startSourcePort: 0,
    status: "enable",
    tos: "0x00",
    tosMask: "0x00",
});

    import pulumi
import pulumiverse_fortios as fortios

trname = fortios.router.Policy("trname",
    action="permit",
    dst_negate="disable",
    end_port=25,
    end_source_port=65535,
    gateway="0.0.0.0",
    input_devices=[fortios.router.PolicyInputDeviceArgs(
        name="port1",
    )],
    output_device="port2",
    protocol=6,
    seq_num=1,
    src_negate="disable",
    start_port=25,
    start_source_port=0,
    status="enable",
    tos="0x00",
    tos_mask="0x00")

    package main

import (
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
	"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/router"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := router.NewPolicy(ctx, "trname", &router.PolicyArgs{
			Action:        pulumi.String("permit"),
			DstNegate:     pulumi.String("disable"),
			EndPort:       pulumi.Int(25),
			EndSourcePort: pulumi.Int(65535),
			Gateway:       pulumi.String("0.0.0.0"),
			InputDevices: router.PolicyInputDeviceArray{
				&router.PolicyInputDeviceArgs{
					Name: pulumi.String("port1"),
				},
			},
			OutputDevice:    pulumi.String("port2"),
			Protocol:        pulumi.Int(6),
			SeqNum:          pulumi.Int(1),
			SrcNegate:       pulumi.String("disable"),
			StartPort:       pulumi.Int(25),
			StartSourcePort: pulumi.Int(0),
			Status:          pulumi.String("enable"),
			Tos:             pulumi.String("0x00"),
			TosMask:         pulumi.String("0x00"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

    using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Fortios = Pulumiverse.Fortios;

return await Deployment.RunAsync(() => 
{
    var trname = new Fortios.Router.Policy("trname", new()
    {
        Action = "permit",
        DstNegate = "disable",
        EndPort = 25,
        EndSourcePort = 65535,
        Gateway = "0.0.0.0",
        InputDevices = new[]
        {
            new Fortios.Router.Inputs.PolicyInputDeviceArgs
            {
                Name = "port1",
            },
        },
        OutputDevice = "port2",
        Protocol = 6,
        SeqNum = 1,
        SrcNegate = "disable",
        StartPort = 25,
        StartSourcePort = 0,
        Status = "enable",
        Tos = "0x00",
        TosMask = "0x00",
    });

});

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.fortios.router.Policy;
import com.pulumi.fortios.router.PolicyArgs;
import com.pulumi.fortios.router.inputs.PolicyInputDeviceArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        var trname = new Policy("trname", PolicyArgs.builder()        
            .action("permit")
            .dstNegate("disable")
            .endPort(25)
            .endSourcePort(65535)
            .gateway("0.0.0.0")
            .inputDevices(PolicyInputDeviceArgs.builder()
                .name("port1")
                .build())
            .outputDevice("port2")
            .protocol(6)
            .seqNum(1)
            .srcNegate("disable")
            .startPort(25)
            .startSourcePort(0)
            .status("enable")
            .tos("0x00")
            .tosMask("0x00")
            .build());

    }
}

    resources:
  trname:
    type: fortios:router:Policy
    properties:
      action: permit
      dstNegate: disable
      endPort: 25
      endSourcePort: 65535
      gateway: 0.0.0.0
      inputDevices:
        - name: port1
      outputDevice: port2
      protocol: 6
      seqNum: 1
      srcNegate: disable
      startPort: 25
      startSourcePort: 0
      status: enable
      tos: 0x00
      tosMask: 0x00

    Create Policy Resource

    Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

    Constructor syntax

    new Policy(name: string, args?: PolicyArgs, opts?: CustomResourceOptions);
    @overload
def Policy(resource_name: str,
           args: Optional[PolicyArgs] = None,
           opts: Optional[ResourceOptions] = None)

@overload
def Policy(resource_name: str,
           opts: Optional[ResourceOptions] = None,
           action: Optional[str] = None,
           comments: Optional[str] = None,
           dst_negate: Optional[str] = None,
           dstaddrs: Optional[Sequence[PolicyDstaddrArgs]] = None,
           dsts: Optional[Sequence[PolicyDstArgs]] = None,
           dynamic_sort_subtable: Optional[str] = None,
           end_port: Optional[int] = None,
           end_source_port: Optional[int] = None,
           gateway: Optional[str] = None,
           get_all_tables: Optional[str] = None,
           input_device_negate: Optional[str] = None,
           input_devices: Optional[Sequence[PolicyInputDeviceArgs]] = None,
           internet_service_customs: Optional[Sequence[PolicyInternetServiceCustomArgs]] = None,
           internet_service_ids: Optional[Sequence[PolicyInternetServiceIdArgs]] = None,
           output_device: Optional[str] = None,
           protocol: Optional[int] = None,
           seq_num: Optional[int] = None,
           src_negate: Optional[str] = None,
           srcaddrs: Optional[Sequence[PolicySrcaddrArgs]] = None,
           srcs: Optional[Sequence[PolicySrcArgs]] = None,
           start_port: Optional[int] = None,
           start_source_port: Optional[int] = None,
           status: Optional[str] = None,
           tos: Optional[str] = None,
           tos_mask: Optional[str] = None,
           vdomparam: Optional[str] = None)
    func NewPolicy(ctx *Context, name string, args *PolicyArgs, opts ...ResourceOption) (*Policy, error)
    public Policy(string name, PolicyArgs? args = null, CustomResourceOptions? opts = null)
    public Policy(String name, PolicyArgs args)
public Policy(String name, PolicyArgs args, CustomResourceOptions options)

    type: fortios:router:Policy
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

    Parameters

    name string
    The unique name of the resource.
    args PolicyArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    resource_name str
    The unique name of the resource.
    args PolicyArgs
    The arguments to resource properties.
    opts ResourceOptions
    Bag of options to control resource's behavior.
    ctx Context
    Context object for the current deployment.
    name string
    The unique name of the resource.
    args PolicyArgs
    The arguments to resource properties.
    opts ResourceOption
    Bag of options to control resource's behavior.
    name string
    The unique name of the resource.
    args PolicyArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    name String
    The unique name of the resource.
    args PolicyArgs
    The arguments to resource properties.
    options CustomResourceOptions
    Bag of options to control resource's behavior.

    Constructor example

    The following reference example uses placeholder values for all input properties.

    var examplepolicyResourceResourceFromRouterpolicy = new Fortios.Router.Policy("examplepolicyResourceResourceFromRouterpolicy", new()
{
    Action = "string",
    Comments = "string",
    DstNegate = "string",
    Dstaddrs = new[]
    {
        new Fortios.Router.Inputs.PolicyDstaddrArgs
        {
            Name = "string",
        },
    },
    Dsts = new[]
    {
        new Fortios.Router.Inputs.PolicyDstArgs
        {
            Subnet = "string",
        },
    },
    DynamicSortSubtable = "string",
    EndPort = 0,
    EndSourcePort = 0,
    Gateway = "string",
    GetAllTables = "string",
    InputDeviceNegate = "string",
    InputDevices = new[]
    {
        new Fortios.Router.Inputs.PolicyInputDeviceArgs
        {
            Name = "string",
        },
    },
    InternetServiceCustoms = new[]
    {
        new Fortios.Router.Inputs.PolicyInternetServiceCustomArgs
        {
            Name = "string",
        },
    },
    InternetServiceIds = new[]
    {
        new Fortios.Router.Inputs.PolicyInternetServiceIdArgs
        {
            Id = 0,
        },
    },
    OutputDevice = "string",
    Protocol = 0,
    SeqNum = 0,
    SrcNegate = "string",
    Srcaddrs = new[]
    {
        new Fortios.Router.Inputs.PolicySrcaddrArgs
        {
            Name = "string",
        },
    },
    Srcs = new[]
    {
        new Fortios.Router.Inputs.PolicySrcArgs
        {
            Subnet = "string",
        },
    },
    StartPort = 0,
    StartSourcePort = 0,
    Status = "string",
    Tos = "string",
    TosMask = "string",
    Vdomparam = "string",
});

    example, err := router.NewPolicy(ctx, "examplepolicyResourceResourceFromRouterpolicy", &router.PolicyArgs{
	Action:    pulumi.String("string"),
	Comments:  pulumi.String("string"),
	DstNegate: pulumi.String("string"),
	Dstaddrs: router.PolicyDstaddrArray{
		&router.PolicyDstaddrArgs{
			Name: pulumi.String("string"),
		},
	},
	Dsts: router.PolicyDstArray{
		&router.PolicyDstArgs{
			Subnet: pulumi.String("string"),
		},
	},
	DynamicSortSubtable: pulumi.String("string"),
	EndPort:             pulumi.Int(0),
	EndSourcePort:       pulumi.Int(0),
	Gateway:             pulumi.String("string"),
	GetAllTables:        pulumi.String("string"),
	InputDeviceNegate:   pulumi.String("string"),
	InputDevices: router.PolicyInputDeviceArray{
		&router.PolicyInputDeviceArgs{
			Name: pulumi.String("string"),
		},
	},
	InternetServiceCustoms: router.PolicyInternetServiceCustomArray{
		&router.PolicyInternetServiceCustomArgs{
			Name: pulumi.String("string"),
		},
	},
	InternetServiceIds: router.PolicyInternetServiceIdArray{
		&router.PolicyInternetServiceIdArgs{
			Id: pulumi.Int(0),
		},
	},
	OutputDevice: pulumi.String("string"),
	Protocol:     pulumi.Int(0),
	SeqNum:       pulumi.Int(0),
	SrcNegate:    pulumi.String("string"),
	Srcaddrs: router.PolicySrcaddrArray{
		&router.PolicySrcaddrArgs{
			Name: pulumi.String("string"),
		},
	},
	Srcs: router.PolicySrcArray{
		&router.PolicySrcArgs{
			Subnet: pulumi.String("string"),
		},
	},
	StartPort:       pulumi.Int(0),
	StartSourcePort: pulumi.Int(0),
	Status:          pulumi.String("string"),
	Tos:             pulumi.String("string"),
	TosMask:         pulumi.String("string"),
	Vdomparam:       pulumi.String("string"),
})

    var examplepolicyResourceResourceFromRouterpolicy = new Policy("examplepolicyResourceResourceFromRouterpolicy", PolicyArgs.builder()
    .action("string")
    .comments("string")
    .dstNegate("string")
    .dstaddrs(PolicyDstaddrArgs.builder()
        .name("string")
        .build())
    .dsts(PolicyDstArgs.builder()
        .subnet("string")
        .build())
    .dynamicSortSubtable("string")
    .endPort(0)
    .endSourcePort(0)
    .gateway("string")
    .getAllTables("string")
    .inputDeviceNegate("string")
    .inputDevices(PolicyInputDeviceArgs.builder()
        .name("string")
        .build())
    .internetServiceCustoms(PolicyInternetServiceCustomArgs.builder()
        .name("string")
        .build())
    .internetServiceIds(PolicyInternetServiceIdArgs.builder()
        .id(0)
        .build())
    .outputDevice("string")
    .protocol(0)
    .seqNum(0)
    .srcNegate("string")
    .srcaddrs(PolicySrcaddrArgs.builder()
        .name("string")
        .build())
    .srcs(PolicySrcArgs.builder()
        .subnet("string")
        .build())
    .startPort(0)
    .startSourcePort(0)
    .status("string")
    .tos("string")
    .tosMask("string")
    .vdomparam("string")
    .build());

    examplepolicy_resource_resource_from_routerpolicy = fortios.router.Policy("examplepolicyResourceResourceFromRouterpolicy",
    action="string",
    comments="string",
    dst_negate="string",
    dstaddrs=[fortios.router.PolicyDstaddrArgs(
        name="string",
    )],
    dsts=[fortios.router.PolicyDstArgs(
        subnet="string",
    )],
    dynamic_sort_subtable="string",
    end_port=0,
    end_source_port=0,
    gateway="string",
    get_all_tables="string",
    input_device_negate="string",
    input_devices=[fortios.router.PolicyInputDeviceArgs(
        name="string",
    )],
    internet_service_customs=[fortios.router.PolicyInternetServiceCustomArgs(
        name="string",
    )],
    internet_service_ids=[fortios.router.PolicyInternetServiceIdArgs(
        id=0,
    )],
    output_device="string",
    protocol=0,
    seq_num=0,
    src_negate="string",
    srcaddrs=[fortios.router.PolicySrcaddrArgs(
        name="string",
    )],
    srcs=[fortios.router.PolicySrcArgs(
        subnet="string",
    )],
    start_port=0,
    start_source_port=0,
    status="string",
    tos="string",
    tos_mask="string",
    vdomparam="string")

    const examplepolicyResourceResourceFromRouterpolicy = new fortios.router.Policy("examplepolicyResourceResourceFromRouterpolicy", {
    action: "string",
    comments: "string",
    dstNegate: "string",
    dstaddrs: [{
        name: "string",
    }],
    dsts: [{
        subnet: "string",
    }],
    dynamicSortSubtable: "string",
    endPort: 0,
    endSourcePort: 0,
    gateway: "string",
    getAllTables: "string",
    inputDeviceNegate: "string",
    inputDevices: [{
        name: "string",
    }],
    internetServiceCustoms: [{
        name: "string",
    }],
    internetServiceIds: [{
        id: 0,
    }],
    outputDevice: "string",
    protocol: 0,
    seqNum: 0,
    srcNegate: "string",
    srcaddrs: [{
        name: "string",
    }],
    srcs: [{
        subnet: "string",
    }],
    startPort: 0,
    startSourcePort: 0,
    status: "string",
    tos: "string",
    tosMask: "string",
    vdomparam: "string",
});

    type: fortios:router:Policy
properties:
    action: string
    comments: string
    dstNegate: string
    dstaddrs:
        - name: string
    dsts:
        - subnet: string
    dynamicSortSubtable: string
    endPort: 0
    endSourcePort: 0
    gateway: string
    getAllTables: string
    inputDeviceNegate: string
    inputDevices:
        - name: string
    internetServiceCustoms:
        - name: string
    internetServiceIds:
        - id: 0
    outputDevice: string
    protocol: 0
    seqNum: 0
    srcNegate: string
    srcaddrs:
        - name: string
    srcs:
        - subnet: string
    startPort: 0
    startSourcePort: 0
    status: string
    tos: string
    tosMask: string
    vdomparam: string

    Policy Resource Properties

    To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

    Inputs

    The Policy resource accepts the following input properties:

    Action string
    Action of the policy route. Valid values: deny, permit.
    Comments string
    Optional comments.
    DstNegate string
    Enable/disable negating destination address match. Valid values: enable, disable.
    Dstaddrs List<Pulumiverse.Fortios.Router.Inputs.PolicyDstaddr>
    Destination address name. The structure of dstaddr block is documented below.
    Dsts List<Pulumiverse.Fortios.Router.Inputs.PolicyDst>
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    EndPort int
    End destination port number (0 - 65535).
    EndSourcePort int
    End source port number (0 - 65535).
    Gateway string
    IP address of the gateway.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    InputDeviceNegate string
    Enable/disable negation of input device match. Valid values: enable, disable.
    InputDevices List<Pulumiverse.Fortios.Router.Inputs.PolicyInputDevice>
    Incoming interface name. The structure of input_device block is documented below.
    InternetServiceCustoms List<Pulumiverse.Fortios.Router.Inputs.PolicyInternetServiceCustom>
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    InternetServiceIds List<Pulumiverse.Fortios.Router.Inputs.PolicyInternetServiceId>
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    OutputDevice string
    Outgoing interface name.
    Protocol int
    Protocol number (0 - 255).
    SeqNum int
    Sequence number.
    SrcNegate string
    Enable/disable negating source address match. Valid values: enable, disable.
    Srcaddrs List<Pulumiverse.Fortios.Router.Inputs.PolicySrcaddr>
    Source address name. The structure of srcaddr block is documented below.
    Srcs List<Pulumiverse.Fortios.Router.Inputs.PolicySrc>
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    StartPort int
    Start destination port number (0 - 65535).
    StartSourcePort int
    Start source port number (0 - 65535).
    Status string
    Enable/disable this policy route. Valid values: enable, disable.
    Tos string
    Type of service bit pattern.
    TosMask string
    Type of service evaluated bits.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Action string
    Action of the policy route. Valid values: deny, permit.
    Comments string
    Optional comments.
    DstNegate string
    Enable/disable negating destination address match. Valid values: enable, disable.
    Dstaddrs []PolicyDstaddrArgs
    Destination address name. The structure of dstaddr block is documented below.
    Dsts []PolicyDstArgs
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    EndPort int
    End destination port number (0 - 65535).
    EndSourcePort int
    End source port number (0 - 65535).
    Gateway string
    IP address of the gateway.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    InputDeviceNegate string
    Enable/disable negation of input device match. Valid values: enable, disable.
    InputDevices []PolicyInputDeviceArgs
    Incoming interface name. The structure of input_device block is documented below.
    InternetServiceCustoms []PolicyInternetServiceCustomArgs
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    InternetServiceIds []PolicyInternetServiceIdArgs
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    OutputDevice string
    Outgoing interface name.
    Protocol int
    Protocol number (0 - 255).
    SeqNum int
    Sequence number.
    SrcNegate string
    Enable/disable negating source address match. Valid values: enable, disable.
    Srcaddrs []PolicySrcaddrArgs
    Source address name. The structure of srcaddr block is documented below.
    Srcs []PolicySrcArgs
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    StartPort int
    Start destination port number (0 - 65535).
    StartSourcePort int
    Start source port number (0 - 65535).
    Status string
    Enable/disable this policy route. Valid values: enable, disable.
    Tos string
    Type of service bit pattern.
    TosMask string
    Type of service evaluated bits.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action String
    Action of the policy route. Valid values: deny, permit.
    comments String
    Optional comments.
    dstNegate String
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs List<PolicyDstaddr>
    Destination address name. The structure of dstaddr block is documented below.
    dsts List<PolicyDst>
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    endPort Integer
    End destination port number (0 - 65535).
    endSourcePort Integer
    End source port number (0 - 65535).
    gateway String
    IP address of the gateway.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    inputDeviceNegate String
    Enable/disable negation of input device match. Valid values: enable, disable.
    inputDevices List<PolicyInputDevice>
    Incoming interface name. The structure of input_device block is documented below.
    internetServiceCustoms List<PolicyInternetServiceCustom>
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internetServiceIds List<PolicyInternetServiceId>
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    outputDevice String
    Outgoing interface name.
    protocol Integer
    Protocol number (0 - 255).
    seqNum Integer
    Sequence number.
    srcNegate String
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs List<PolicySrcaddr>
    Source address name. The structure of srcaddr block is documented below.
    srcs List<PolicySrc>
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    startPort Integer
    Start destination port number (0 - 65535).
    startSourcePort Integer
    Start source port number (0 - 65535).
    status String
    Enable/disable this policy route. Valid values: enable, disable.
    tos String
    Type of service bit pattern.
    tosMask String
    Type of service evaluated bits.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action string
    Action of the policy route. Valid values: deny, permit.
    comments string
    Optional comments.
    dstNegate string
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs PolicyDstaddr[]
    Destination address name. The structure of dstaddr block is documented below.
    dsts PolicyDst[]
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    endPort number
    End destination port number (0 - 65535).
    endSourcePort number
    End source port number (0 - 65535).
    gateway string
    IP address of the gateway.
    getAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    inputDeviceNegate string
    Enable/disable negation of input device match. Valid values: enable, disable.
    inputDevices PolicyInputDevice[]
    Incoming interface name. The structure of input_device block is documented below.
    internetServiceCustoms PolicyInternetServiceCustom[]
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internetServiceIds PolicyInternetServiceId[]
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    outputDevice string
    Outgoing interface name.
    protocol number
    Protocol number (0 - 255).
    seqNum number
    Sequence number.
    srcNegate string
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs PolicySrcaddr[]
    Source address name. The structure of srcaddr block is documented below.
    srcs PolicySrc[]
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    startPort number
    Start destination port number (0 - 65535).
    startSourcePort number
    Start source port number (0 - 65535).
    status string
    Enable/disable this policy route. Valid values: enable, disable.
    tos string
    Type of service bit pattern.
    tosMask string
    Type of service evaluated bits.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action str
    Action of the policy route. Valid values: deny, permit.
    comments str
    Optional comments.
    dst_negate str
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs Sequence[PolicyDstaddrArgs]
    Destination address name. The structure of dstaddr block is documented below.
    dsts Sequence[PolicyDstArgs]
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamic_sort_subtable str
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    end_port int
    End destination port number (0 - 65535).
    end_source_port int
    End source port number (0 - 65535).
    gateway str
    IP address of the gateway.
    get_all_tables str
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    input_device_negate str
    Enable/disable negation of input device match. Valid values: enable, disable.
    input_devices Sequence[PolicyInputDeviceArgs]
    Incoming interface name. The structure of input_device block is documented below.
    internet_service_customs Sequence[PolicyInternetServiceCustomArgs]
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internet_service_ids Sequence[PolicyInternetServiceIdArgs]
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    output_device str
    Outgoing interface name.
    protocol int
    Protocol number (0 - 255).
    seq_num int
    Sequence number.
    src_negate str
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs Sequence[PolicySrcaddrArgs]
    Source address name. The structure of srcaddr block is documented below.
    srcs Sequence[PolicySrcArgs]
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    start_port int
    Start destination port number (0 - 65535).
    start_source_port int
    Start source port number (0 - 65535).
    status str
    Enable/disable this policy route. Valid values: enable, disable.
    tos str
    Type of service bit pattern.
    tos_mask str
    Type of service evaluated bits.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action String
    Action of the policy route. Valid values: deny, permit.
    comments String
    Optional comments.
    dstNegate String
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs List<Property Map>
    Destination address name. The structure of dstaddr block is documented below.
    dsts List<Property Map>
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    endPort Number
    End destination port number (0 - 65535).
    endSourcePort Number
    End source port number (0 - 65535).
    gateway String
    IP address of the gateway.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    inputDeviceNegate String
    Enable/disable negation of input device match. Valid values: enable, disable.
    inputDevices List<Property Map>
    Incoming interface name. The structure of input_device block is documented below.
    internetServiceCustoms List<Property Map>
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internetServiceIds List<Property Map>
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    outputDevice String
    Outgoing interface name.
    protocol Number
    Protocol number (0 - 255).
    seqNum Number
    Sequence number.
    srcNegate String
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs List<Property Map>
    Source address name. The structure of srcaddr block is documented below.
    srcs List<Property Map>
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    startPort Number
    Start destination port number (0 - 65535).
    startSourcePort Number
    Start source port number (0 - 65535).
    status String
    Enable/disable this policy route. Valid values: enable, disable.
    tos String
    Type of service bit pattern.
    tosMask String
    Type of service evaluated bits.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Outputs

    All input properties are implicitly available as output properties. Additionally, the Policy resource produces the following output properties:

    Id string
    The provider-assigned unique ID for this managed resource.
    Id string
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.
    id string
    The provider-assigned unique ID for this managed resource.
    id str
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.

    Look up Existing Policy Resource

    Get an existing Policy resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

    public static get(name: string, id: Input<ID>, state?: PolicyState, opts?: CustomResourceOptions): Policy
    @staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        action: Optional[str] = None,
        comments: Optional[str] = None,
        dst_negate: Optional[str] = None,
        dstaddrs: Optional[Sequence[PolicyDstaddrArgs]] = None,
        dsts: Optional[Sequence[PolicyDstArgs]] = None,
        dynamic_sort_subtable: Optional[str] = None,
        end_port: Optional[int] = None,
        end_source_port: Optional[int] = None,
        gateway: Optional[str] = None,
        get_all_tables: Optional[str] = None,
        input_device_negate: Optional[str] = None,
        input_devices: Optional[Sequence[PolicyInputDeviceArgs]] = None,
        internet_service_customs: Optional[Sequence[PolicyInternetServiceCustomArgs]] = None,
        internet_service_ids: Optional[Sequence[PolicyInternetServiceIdArgs]] = None,
        output_device: Optional[str] = None,
        protocol: Optional[int] = None,
        seq_num: Optional[int] = None,
        src_negate: Optional[str] = None,
        srcaddrs: Optional[Sequence[PolicySrcaddrArgs]] = None,
        srcs: Optional[Sequence[PolicySrcArgs]] = None,
        start_port: Optional[int] = None,
        start_source_port: Optional[int] = None,
        status: Optional[str] = None,
        tos: Optional[str] = None,
        tos_mask: Optional[str] = None,
        vdomparam: Optional[str] = None) -> Policy
    func GetPolicy(ctx *Context, name string, id IDInput, state *PolicyState, opts ...ResourceOption) (*Policy, error)
    public static Policy Get(string name, Input<string> id, PolicyState? state, CustomResourceOptions? opts = null)
    public static Policy get(String name, Output<String> id, PolicyState state, CustomResourceOptions options)
    Resource lookup is not supported in YAML
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    resource_name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    The following state arguments are supported:
    Action string
    Action of the policy route. Valid values: deny, permit.
    Comments string
    Optional comments.
    DstNegate string
    Enable/disable negating destination address match. Valid values: enable, disable.
    Dstaddrs List<Pulumiverse.Fortios.Router.Inputs.PolicyDstaddr>
    Destination address name. The structure of dstaddr block is documented below.
    Dsts List<Pulumiverse.Fortios.Router.Inputs.PolicyDst>
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    EndPort int
    End destination port number (0 - 65535).
    EndSourcePort int
    End source port number (0 - 65535).
    Gateway string
    IP address of the gateway.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    InputDeviceNegate string
    Enable/disable negation of input device match. Valid values: enable, disable.
    InputDevices List<Pulumiverse.Fortios.Router.Inputs.PolicyInputDevice>
    Incoming interface name. The structure of input_device block is documented below.
    InternetServiceCustoms List<Pulumiverse.Fortios.Router.Inputs.PolicyInternetServiceCustom>
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    InternetServiceIds List<Pulumiverse.Fortios.Router.Inputs.PolicyInternetServiceId>
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    OutputDevice string
    Outgoing interface name.
    Protocol int
    Protocol number (0 - 255).
    SeqNum int
    Sequence number.
    SrcNegate string
    Enable/disable negating source address match. Valid values: enable, disable.
    Srcaddrs List<Pulumiverse.Fortios.Router.Inputs.PolicySrcaddr>
    Source address name. The structure of srcaddr block is documented below.
    Srcs List<Pulumiverse.Fortios.Router.Inputs.PolicySrc>
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    StartPort int
    Start destination port number (0 - 65535).
    StartSourcePort int
    Start source port number (0 - 65535).
    Status string
    Enable/disable this policy route. Valid values: enable, disable.
    Tos string
    Type of service bit pattern.
    TosMask string
    Type of service evaluated bits.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Action string
    Action of the policy route. Valid values: deny, permit.
    Comments string
    Optional comments.
    DstNegate string
    Enable/disable negating destination address match. Valid values: enable, disable.
    Dstaddrs []PolicyDstaddrArgs
    Destination address name. The structure of dstaddr block is documented below.
    Dsts []PolicyDstArgs
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    EndPort int
    End destination port number (0 - 65535).
    EndSourcePort int
    End source port number (0 - 65535).
    Gateway string
    IP address of the gateway.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    InputDeviceNegate string
    Enable/disable negation of input device match. Valid values: enable, disable.
    InputDevices []PolicyInputDeviceArgs
    Incoming interface name. The structure of input_device block is documented below.
    InternetServiceCustoms []PolicyInternetServiceCustomArgs
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    InternetServiceIds []PolicyInternetServiceIdArgs
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    OutputDevice string
    Outgoing interface name.
    Protocol int
    Protocol number (0 - 255).
    SeqNum int
    Sequence number.
    SrcNegate string
    Enable/disable negating source address match. Valid values: enable, disable.
    Srcaddrs []PolicySrcaddrArgs
    Source address name. The structure of srcaddr block is documented below.
    Srcs []PolicySrcArgs
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    StartPort int
    Start destination port number (0 - 65535).
    StartSourcePort int
    Start source port number (0 - 65535).
    Status string
    Enable/disable this policy route. Valid values: enable, disable.
    Tos string
    Type of service bit pattern.
    TosMask string
    Type of service evaluated bits.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action String
    Action of the policy route. Valid values: deny, permit.
    comments String
    Optional comments.
    dstNegate String
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs List<PolicyDstaddr>
    Destination address name. The structure of dstaddr block is documented below.
    dsts List<PolicyDst>
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    endPort Integer
    End destination port number (0 - 65535).
    endSourcePort Integer
    End source port number (0 - 65535).
    gateway String
    IP address of the gateway.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    inputDeviceNegate String
    Enable/disable negation of input device match. Valid values: enable, disable.
    inputDevices List<PolicyInputDevice>
    Incoming interface name. The structure of input_device block is documented below.
    internetServiceCustoms List<PolicyInternetServiceCustom>
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internetServiceIds List<PolicyInternetServiceId>
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    outputDevice String
    Outgoing interface name.
    protocol Integer
    Protocol number (0 - 255).
    seqNum Integer
    Sequence number.
    srcNegate String
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs List<PolicySrcaddr>
    Source address name. The structure of srcaddr block is documented below.
    srcs List<PolicySrc>
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    startPort Integer
    Start destination port number (0 - 65535).
    startSourcePort Integer
    Start source port number (0 - 65535).
    status String
    Enable/disable this policy route. Valid values: enable, disable.
    tos String
    Type of service bit pattern.
    tosMask String
    Type of service evaluated bits.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action string
    Action of the policy route. Valid values: deny, permit.
    comments string
    Optional comments.
    dstNegate string
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs PolicyDstaddr[]
    Destination address name. The structure of dstaddr block is documented below.
    dsts PolicyDst[]
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    endPort number
    End destination port number (0 - 65535).
    endSourcePort number
    End source port number (0 - 65535).
    gateway string
    IP address of the gateway.
    getAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    inputDeviceNegate string
    Enable/disable negation of input device match. Valid values: enable, disable.
    inputDevices PolicyInputDevice[]
    Incoming interface name. The structure of input_device block is documented below.
    internetServiceCustoms PolicyInternetServiceCustom[]
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internetServiceIds PolicyInternetServiceId[]
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    outputDevice string
    Outgoing interface name.
    protocol number
    Protocol number (0 - 255).
    seqNum number
    Sequence number.
    srcNegate string
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs PolicySrcaddr[]
    Source address name. The structure of srcaddr block is documented below.
    srcs PolicySrc[]
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    startPort number
    Start destination port number (0 - 65535).
    startSourcePort number
    Start source port number (0 - 65535).
    status string
    Enable/disable this policy route. Valid values: enable, disable.
    tos string
    Type of service bit pattern.
    tosMask string
    Type of service evaluated bits.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action str
    Action of the policy route. Valid values: deny, permit.
    comments str
    Optional comments.
    dst_negate str
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs Sequence[PolicyDstaddrArgs]
    Destination address name. The structure of dstaddr block is documented below.
    dsts Sequence[PolicyDstArgs]
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamic_sort_subtable str
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    end_port int
    End destination port number (0 - 65535).
    end_source_port int
    End source port number (0 - 65535).
    gateway str
    IP address of the gateway.
    get_all_tables str
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    input_device_negate str
    Enable/disable negation of input device match. Valid values: enable, disable.
    input_devices Sequence[PolicyInputDeviceArgs]
    Incoming interface name. The structure of input_device block is documented below.
    internet_service_customs Sequence[PolicyInternetServiceCustomArgs]
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internet_service_ids Sequence[PolicyInternetServiceIdArgs]
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    output_device str
    Outgoing interface name.
    protocol int
    Protocol number (0 - 255).
    seq_num int
    Sequence number.
    src_negate str
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs Sequence[PolicySrcaddrArgs]
    Source address name. The structure of srcaddr block is documented below.
    srcs Sequence[PolicySrcArgs]
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    start_port int
    Start destination port number (0 - 65535).
    start_source_port int
    Start source port number (0 - 65535).
    status str
    Enable/disable this policy route. Valid values: enable, disable.
    tos str
    Type of service bit pattern.
    tos_mask str
    Type of service evaluated bits.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action String
    Action of the policy route. Valid values: deny, permit.
    comments String
    Optional comments.
    dstNegate String
    Enable/disable negating destination address match. Valid values: enable, disable.
    dstaddrs List<Property Map>
    Destination address name. The structure of dstaddr block is documented below.
    dsts List<Property Map>
    Destination IP and mask (x.x.x.x/x). The structure of dst block is documented below.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    endPort Number
    End destination port number (0 - 65535).
    endSourcePort Number
    End source port number (0 - 65535).
    gateway String
    IP address of the gateway.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwish conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    inputDeviceNegate String
    Enable/disable negation of input device match. Valid values: enable, disable.
    inputDevices List<Property Map>
    Incoming interface name. The structure of input_device block is documented below.
    internetServiceCustoms List<Property Map>
    Custom Destination Internet Service name. The structure of internet_service_custom block is documented below.
    internetServiceIds List<Property Map>
    Destination Internet Service ID. The structure of internet_service_id block is documented below.
    outputDevice String
    Outgoing interface name.
    protocol Number
    Protocol number (0 - 255).
    seqNum Number
    Sequence number.
    srcNegate String
    Enable/disable negating source address match. Valid values: enable, disable.
    srcaddrs List<Property Map>
    Source address name. The structure of srcaddr block is documented below.
    srcs List<Property Map>
    Source IP and mask (x.x.x.x/x). The structure of src block is documented below.
    startPort Number
    Start destination port number (0 - 65535).
    startSourcePort Number
    Start source port number (0 - 65535).
    status String
    Enable/disable this policy route. Valid values: enable, disable.
    tos String
    Type of service bit pattern.
    tosMask String
    Type of service evaluated bits.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Supporting Types

    PolicyDst, PolicyDstArgs

    Subnet string
    IP and mask.
    Subnet string
    IP and mask.
    subnet String
    IP and mask.
    subnet string
    IP and mask.
    subnet str
    IP and mask.
    subnet String
    IP and mask.

    PolicyDstaddr, PolicyDstaddrArgs

    Name string
    Address/group name.
    Name string
    Address/group name.
    name String
    Address/group name.
    name string
    Address/group name.
    name str
    Address/group name.
    name String
    Address/group name.

    PolicyInputDevice, PolicyInputDeviceArgs

    Name string
    Interface name.
    Name string
    Interface name.
    name String
    Interface name.
    name string
    Interface name.
    name str
    Interface name.
    name String
    Interface name.

    PolicyInternetServiceCustom, PolicyInternetServiceCustomArgs

    Name string
    Custom Destination Internet Service name.
    Name string
    Custom Destination Internet Service name.
    name String
    Custom Destination Internet Service name.
    name string
    Custom Destination Internet Service name.
    name str
    Custom Destination Internet Service name.
    name String
    Custom Destination Internet Service name.

    PolicyInternetServiceId, PolicyInternetServiceIdArgs

    Id int
    Destination Internet Service ID.
    Id int
    Destination Internet Service ID.
    id Integer
    Destination Internet Service ID.
    id number
    Destination Internet Service ID.
    id int
    Destination Internet Service ID.
    id Number
    Destination Internet Service ID.

    PolicySrc, PolicySrcArgs

    Subnet string
    IP and mask.
    Subnet string
    IP and mask.
    subnet String
    IP and mask.
    subnet string
    IP and mask.
    subnet str
    IP and mask.
    subnet String
    IP and mask.

    PolicySrcaddr, PolicySrcaddrArgs

    Name string
    Address/group name.
    Name string
    Address/group name.
    name String
    Address/group name.
    name string
    Address/group name.
    name str
    Address/group name.
    name String
    Address/group name.

    Import

    Router Policy can be imported using any of these accepted formats:

    $ pulumi import fortios:router/policy:Policy labelname {{seq_num}}

    If you do not want to import arguments of block:

    $ export “FORTIOS_IMPORT_TABLE”=“false”

    $ pulumi import fortios:router/policy:Policy labelname {{seq_num}}

    $ unset “FORTIOS_IMPORT_TABLE”

    To learn more about importing existing cloud resources, see Importing resources.

    Package Details

    Repository
    fortios pulumiverse/pulumi-fortios
    License
    Apache-2.0
    Notes
    This Pulumi package is based on the fortios Terraform Provider.
    fortios logo
    Fortios v0.0.5 published on Tuesday, Apr 9, 2024 by pulumiverse
    pulumiverse/pulumi-fortios